How to

How to Clean Rust off a Gun – Easy Cleaning Tips for Rifles

You must be placing your gun behind your car seat or at the back of your wardrobe, or in-ground under the sand, or housing kits to be safe during the tough time. But your gun is not secure. Your rifle can catch rust at such places and can also get jammed. To remove the rust of a gun, take time and clean it periodically. Though most of the arms are anodized with a coating which guards the weapon against rust, one can remove rust from the gun in 5 simple ways, the article below will make your struggle easy and give your rifle its shine back.

How to Clean Rust off a Gun?

1. How to remove rust with Dremel

Due to humidity and ambient air, your gun can get rusted stops at many places. To avoid these stains of rust, one can use a Dremel tool. The tool is made of silicon carbide and is made for removing rust from old guns, removing stains from metals, removing trigger serrations, cleaning the damaged pistols, and polishing the pistols.

maxresdefault

Follow the steps to remove rust with a Dremel:

  • Unload the firearm before doing anything. 
  • Insert Cratex on Dremel tool.
  • Apply little gun oil on the rusted areas. 
  • Wait for a minute to settle the oil.
  • Start running Dremel on the rusted surface.
  • Use a towel to wipe, and continue the process until the gun gets thoroughly cleaned.

2. How to remove rust with steel wool

When you apply wrong abrasive material, the firearm can be ruined severely. When you use steel wool, there are minimum chances of damage and adverse effects on your gun. Using steel wool is easy and effective. You can use any oil for this step. Used newspaper and towels are the essentials of this process.

rust-tfb

  • Firstly, check whether the gun is unloaded.
  • Be in a quiet place so you can be focused on your work.
  • Make a proper place for a gun so that it doesn’t move while you clean the gun.
  • Keep the gun in a safe direction.
  • Pour oil on the rusted part and don’t put an excess of oil. 
  • Use a steel wool pad to rub the surface of the gun.
  • Clean the gun with soft hands and slowly. 
  • Add gun cleaner and rub again on the rusted surface. 
  • Wipe the cleaner with napkins, and you can find your gun clean as earlier.

3. How to remove rust with oil

The most effortless technique for cleaning the gun is using oil.

  • Firstly, check whether the gun is unloaded.
  • Apply firearm oil.
  • Let oil loosen a bit on the rusted surface.
  • Use a cotton cloth to wipe the surface well.
  • Keep cleaning until the rust gets cleaned. 
  • Clean in the pattern where you move your index finger in a circular motion.
  • Now clean the gun with a clean lafooh and give it an hour to gain its shine.

4. How to use battery charger as a rust remover

Removing the rust with the help of a battery charger is a very modern technique, and it is mostly used to clean copper, aluminum, rifles, and brass. For cleaning with battery charger, you will need a plastic container, steel rod, baking soda, and a battery charger.maxresdefault (1)

  • Mix 1 tablespoon of baking soda with a gallon of water. 
  • Keep the steel rod in the container; be safe when you do this. 
  • Here, the rod is an anode, and the solution is the cathode.
  • Connecting cathode to rusted areas and anode to the steel rod.
  • Once you see bubbles in water, you can come to a solution that the process is going well.
  • Keep it for 5 hours.
  • Remove the gun part you kept in the solution.
  • Wipe the parts with cotton cloth thoroughly.
  • The gun is ready and shining like a new one.

5. How to remove rust with WD-40

When it comes to removing rust with WD-40, the gun owners count on it. Mostly ever gun industry owners use WD-40 for cleaning guns. WD-40 has moisture displacement property and rust preventing features.FXVHL72J76GH0P2.LARGE

  • Put the gun arm on a flat surface.
  • Spray the WD-40 solution on rust areas.
  • Let the solution dry for a day and a half and respray it.
  • Wipe the surface with a towel and have a look at your brand new gun.

Preventive measures

  • The easiest method to prevent rust is, wipe the surfaces of the gun with a damp cloth and then a dry cloth.
  • Remember, drier the gun; less is the possibility of rust.
  • Regular maintenance and drying process can keep your gun away from rust and stains.
  • For arms, clean once or twice a month.

If you are a gun owner and want to keep your gun rust free and with original shine, then do follow the steps and keep your gun new. Even if your weapon is rusted, do not worry at all. Do the easy steps to clean your gun and keep doing the process to prevent it from rust.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button